4ft T8 LED tube, case of 30, Type A+B (ballast & line voltage compatible), selectable wattage (10-22w), Selectable CCT (3500-6500k)
Now just $6.50 each! This is the LED tube that makes fluorescent tubes obsolete! These 4’ T8s are interchangeable with fluorescent T8s. They can operate with an electronic ballast, or without a ballast on 120-277v line voltage. You can replace fluorescent tubes as they burn out, and when the ballast goes out, remove it and use the same lamps on the line voltage. You can select the right color temp for each application as you install them. Use 5000k for warehouse areas, 4000k for office areas, 3500k for bathrooms, breakrooms & closets, or whatever the occupants prefer!
SPECS
Power: 10/12/15/18/22w selectable by switch
CCT: 3500/4000/5000/5700/6500k selectable by switch
Efficiency: 140 Lm/W
Lens: frosted
Input: 120-277vAC
IP Rating: indoor
Mounting: G13 bi-pin, single end or double end power
Model: JEN-T8
Certifications: ETL / DLC
Applications: replace 4' fluorescent T8s on existing sockets, with or without electronic ballast
Now just $6.50 each! This is the LED tube that makes fluorescent tubes obsolete! These 4’ T8s are interchangeable with fluorescent T8s. They can operate with an electronic ballast, or without a ballast on 120-277v line voltage. You can replace fluorescent tubes as they burn out, and when the ballast goes out, remove it and use the same lamps on the line voltage. You can select the right color temp for each application as you install them. Use 5000k for warehouse areas, 4000k for office areas, 3500k for bathrooms, breakrooms & closets, or whatever the occupants prefer!
SPECS
Power: 10/12/15/18/22w selectable by switch
CCT: 3500/4000/5000/5700/6500k selectable by switch
Efficiency: 140 Lm/W
Lens: frosted
Input: 120-277vAC
IP Rating: indoor
Mounting: G13 bi-pin, single end or double end power
Model: JEN-T8
Certifications: ETL / DLC
Applications: replace 4' fluorescent T8s on existing sockets, with or without electronic ballast
Now just $6.50 each! This is the LED tube that makes fluorescent tubes obsolete! These 4’ T8s are interchangeable with fluorescent T8s. They can operate with an electronic ballast, or without a ballast on 120-277v line voltage. You can replace fluorescent tubes as they burn out, and when the ballast goes out, remove it and use the same lamps on the line voltage. You can select the right color temp for each application as you install them. Use 5000k for warehouse areas, 4000k for office areas, 3500k for bathrooms, breakrooms & closets, or whatever the occupants prefer!
SPECS
Power: 10/12/15/18/22w selectable by switch
CCT: 3500/4000/5000/5700/6500k selectable by switch
Efficiency: 140 Lm/W
Lens: frosted
Input: 120-277vAC
IP Rating: indoor
Mounting: G13 bi-pin, single end or double end power
Model: JEN-T8
Certifications: ETL / DLC
Applications: replace 4' fluorescent T8s on existing sockets, with or without electronic ballast